Analysis of the errors associated with typical pulverized coal char combustion modeling assumptions for oxy-fuel combustion

In CFD models of pulverized coal combustion, which often have complex, turbulent flows with millions of coal particles reacting, the char combustion sub-model needs to be computationally efficient. There are several common assumptions that are made in char combustion models that allow for a compact, computationally efficient model. In this work, oft used single- and double-film simplified models are described, and the temperature and carbon combustion rates predicted from these models are compared against a more accurate continuous-film model. Both the single- and double-film models include a description of the heterogeneous reactions of carbon with O₂, CO₂, and H₂O, along with a Thiele based description of reactant penetration. As compared to the continuous-film model, the double-film model predicts higher temperatures and carbon consumption rates, while the single-film model gives more accurate results. A single-film model is therefore preferred to a double-film model for a simplified, yet fairly accurate description of char combustion. For particles from 65 to 135μm, in O₂ concentrations ranging from 12 to 60vol.%, with either CO₂ or N₂ as a diluent, particle temperatures from the single-film model are expected to be accurate within 270K, and carbon consumption rate predictions should be within 16%, with greater accuracies for a CO₂ diluent and at lower bulk oxygen concentrations. A single-film model that accounts for reactant penetration and both oxidation and gasification reactions is suggested as a computationally efficient sub-model for coal char combustion that is reasonably accurate over a wide range of gas environments.