TY - JOUR
T1 - One-Step Plasma Jet Deposition and Self-Sintering of Gold Nanoparticle Inks on Low-Temperature Substrates
AU - Manzi, Jacob
AU - Varghese, Tony
AU - Eixenberger, Josh
AU - Prakasan, Lakshmi
AU - Estrada, David
AU - Subbaraman, Harish
N1 - Publisher Copyright: © 2022 IEEE.
PY - 2024
Y1 - 2024
N2 - Flexible electronics on low-temperature substrates like paper are very appealing for their use in disposable and biocompatible electronic applications and areas like healthcare, wearables, and consumer electronics. Plasma-jet printing (PJP) uses a dielectric barrier discharge plasma to focus aerosolized nanoparticles onto a target substrate. The same plasma can be used to change the properties of the printed material and even sinter in situ. In this work, we demonstrate the one-step deposition of gold structures onto flexible and low-temperature substrates without the need for thermal or photonic postprocessing. We also explore the plasma effect on the deposition of the gold nanoparticle ink. The plasma voltage is optimized for the sintering of the gold nanoparticles, and a simple procedure for manufacturing traces with increased adhesion and conductivity is presented, with a peak conductivity of 6.2\times 10{5} S/m. PJP-printed gold LED interconnects and microheaters on flexible substrates are developed to demonstrate the potential of this single-step sintered deposition of conductive traces on low-temperature substrates.
AB - Flexible electronics on low-temperature substrates like paper are very appealing for their use in disposable and biocompatible electronic applications and areas like healthcare, wearables, and consumer electronics. Plasma-jet printing (PJP) uses a dielectric barrier discharge plasma to focus aerosolized nanoparticles onto a target substrate. The same plasma can be used to change the properties of the printed material and even sinter in situ. In this work, we demonstrate the one-step deposition of gold structures onto flexible and low-temperature substrates without the need for thermal or photonic postprocessing. We also explore the plasma effect on the deposition of the gold nanoparticle ink. The plasma voltage is optimized for the sintering of the gold nanoparticles, and a simple procedure for manufacturing traces with increased adhesion and conductivity is presented, with a peak conductivity of 6.2\times 10{5} S/m. PJP-printed gold LED interconnects and microheaters on flexible substrates are developed to demonstrate the potential of this single-step sintered deposition of conductive traces on low-temperature substrates.
KW - Additive manufacturing
KW - flexible hybrid electronics
KW - plasma jet printing (PJP)
KW - wearables
UR - http://www.scopus.com/inward/record.url?scp=85214599658&partnerID=8YFLogxK
U2 - 10.1109/JFLEX.2024.3399710
DO - 10.1109/JFLEX.2024.3399710
M3 - Article
AN - SCOPUS:85214599658
SN - 2768-167X
VL - 3
SP - 197
EP - 204
JO - IEEE Journal on Flexible Electronics
JF - IEEE Journal on Flexible Electronics
IS - 5
ER -