TY - JOUR
T1 - Particle formation during pressurized entrained flow gasification of wood powder
T2 - Effects of process conditions on chemical composition, nanostructure, and reactivity
AU - Wiinikka, Henrik
AU - Toth, Pal
AU - Jansson, Kjell
AU - Molinder, Roger
AU - Broström, Markus
AU - Sandström, Linda
AU - Lighty, Jo Ann S.
AU - Weiland, Fredrik
N1 - Publisher Copyright:
© 2017 The Combustion Institute
PY - 2018/3
Y1 - 2018/3
N2 - The influence of operating condition on particle formation during pressurized, oxygen blown gasification of wood powder with an ash content of 0.4 wt% was investigated. The investigation was performed with a pilot scale gasifier operated at 7 bar(a). Two loads, 400 and 600 kW were tested, with the oxygen equivalence ratio (λ) varied between 0.25 and 0.50. Particle concentration and mass size distribution was analyzed with a low pressure cascade impactor and the collected particles were characterized for morphology, elemental composition, nanostructure, and reactivity using scanning electron microscopy/high resolution transmission electron microscopy/energy dispersive spectroscopy, and thermogravimetric analysis. In order to quantify the nanostructure of the particles and identify prevalent sub-structures, a novel image analysis framework was used. It was found that the process temperature, affected both by λ and the load of the gasifier, had a significant influence on the particle formation processes. At low temperature (1060 °C), the formed soot particles seemed to be resistant to the oxidation process; however, when the oxidation process started at 1119 °C, the internal burning of the more reactive particle core began. A further increase in temperature (> 1313 °C) lead to the oxidation of the less reactive particle shell. When the shell finally collapsed due to severe oxidation, the original soot particle shape and nanostructure also disappeared and the resulting particle could not be considered as a soot anymore. Instead, the particle shape and nanostructure at the highest temperatures (> 1430 °C) were a function of the inorganic content and of the inorganic elements the individual particle consisted of. All of these effects together lead to the soot particles in the real gasifier environment having less and less ordered nanostructure and higher and higher reactivity as the temperature increased; i.e., they followed the opposite trend of what is observed during laboratory-scale studies with fuels not containing any ash-forming elements and where the temperature was not controlled by λ.
AB - The influence of operating condition on particle formation during pressurized, oxygen blown gasification of wood powder with an ash content of 0.4 wt% was investigated. The investigation was performed with a pilot scale gasifier operated at 7 bar(a). Two loads, 400 and 600 kW were tested, with the oxygen equivalence ratio (λ) varied between 0.25 and 0.50. Particle concentration and mass size distribution was analyzed with a low pressure cascade impactor and the collected particles were characterized for morphology, elemental composition, nanostructure, and reactivity using scanning electron microscopy/high resolution transmission electron microscopy/energy dispersive spectroscopy, and thermogravimetric analysis. In order to quantify the nanostructure of the particles and identify prevalent sub-structures, a novel image analysis framework was used. It was found that the process temperature, affected both by λ and the load of the gasifier, had a significant influence on the particle formation processes. At low temperature (1060 °C), the formed soot particles seemed to be resistant to the oxidation process; however, when the oxidation process started at 1119 °C, the internal burning of the more reactive particle core began. A further increase in temperature (> 1313 °C) lead to the oxidation of the less reactive particle shell. When the shell finally collapsed due to severe oxidation, the original soot particle shape and nanostructure also disappeared and the resulting particle could not be considered as a soot anymore. Instead, the particle shape and nanostructure at the highest temperatures (> 1430 °C) were a function of the inorganic content and of the inorganic elements the individual particle consisted of. All of these effects together lead to the soot particles in the real gasifier environment having less and less ordered nanostructure and higher and higher reactivity as the temperature increased; i.e., they followed the opposite trend of what is observed during laboratory-scale studies with fuels not containing any ash-forming elements and where the temperature was not controlled by λ.
KW - Biomass
KW - Gasification
KW - HRTEM
KW - Nanostructure
KW - Soot
UR - http://www.scopus.com/inward/record.url?scp=85034087389&partnerID=8YFLogxK
U2 - 10.1016/j.combustflame.2017.10.025
DO - 10.1016/j.combustflame.2017.10.025
M3 - Article
AN - SCOPUS:85034087389
SN - 0010-2180
VL - 189
SP - 240
EP - 256
JO - Combustion and Flame
JF - Combustion and Flame
ER -