Reproducible Nanostructure Fabrication Using Atomic Force Microscopy Indentation with Minimal Tip Damage

SeungHee Jeon, BongWoo Ryu, Wonho Jhe, Zheong G. Khim, Byung I. Kim

Research output: Contribution to journalArticlepeer-review

3 Scopus citations

Abstract

A uniform pattern of quantum dots and nanowires were reproducibly fabricated by creating holes in a two-layer structure using atomic force microscopy (AFM) indentation, dry-etching of polymer resists, and metal deposition through the indentation holes. The two-layer structure was created by depositing a thin gold layer onto a polymethyl methacrylate (PMMA) layer on a silicon substrate. The indentation depth was set so that the AFM tip penetrated the thin gold layer without the tip contacting the silicon substrate. This two-layer indentation was used to create a pattern of holes in the thin gold layer. Then, the PMMA was exposed to an isotropic O 2 plasma etchant through the holes in the indentation pattern to form an undercut between the substrate and the gold layer. Quantum dots were subsequently created through the deposition of gold on the exposed silicon substrate through the indentation holes. Gold nanowires were also fabricated by creating indentation holes consecutively and optimizing the distance between the holes using the same two-layer indentation method. The topographic and electrical measurements of the fabricated gold nanowires suggest that our method is capable of making uniform and reproducible nanowires. The scanning electron microscopy images of the tips confirmed that the consecutive-hole-indentation method is less invasive than the conventional ploughing method, where constant tip contact occurs with the substrate during the formation of nanowires.

Original languageAmerican English
JournalPhysics Faculty Publications and Presentations
DOIs
StatePublished - 24 Jan 2014

Keywords

  • atomic force microscopy
  • contact resistance
  • gold
  • nanofabrication
  • nanowires

EGS Disciplines

  • Physics

Fingerprint

Dive into the research topics of 'Reproducible Nanostructure Fabrication Using Atomic Force Microscopy Indentation with Minimal Tip Damage'. Together they form a unique fingerprint.

Cite this